{
  "schemaVersion": 1,
  "publisher": "Eucalyptus One LLC",
  "product": "engineering-workbench",
  "tool": "resistor-divider",
  "title": "Resistor-divider tolerance",
  "scope": "Free website calculator example; not a report from the pre-release application.",
  "calculatorUrl": "https://eucalyptusone.com/tools/engineering/resistor-divider/",
  "inputs": {
    "vin": "5",
    "r1": "10000",
    "r2": "10000",
    "t1": "1",
    "t2": "1"
  },
  "inputLabels": {
    "vin": "Input voltage (V)",
    "r1": "Upper resistor R₁ (Ω)",
    "r2": "Lower resistor R₂ (Ω)",
    "t1": "R₁ tolerance (%)",
    "t2": "R₂ tolerance (%)"
  },
  "result": {
    "summary": "Nominal output: 2.5 V\nMinimum output: 2.475 V\nMaximum output: 2.525 V\nDivider current: 0.25 mA",
    "metrics": [
      {
        "label": "Nominal output",
        "value": 2.5,
        "unit": "V"
      },
      {
        "label": "Minimum output",
        "value": 2.475,
        "unit": "V"
      },
      {
        "label": "Maximum output",
        "value": 2.525,
        "unit": "V"
      },
      {
        "label": "Divider current",
        "value": 0.25,
        "unit": "mA"
      }
    ],
    "steps": [
      {
        "title": "Nominal resistor ratio",
        "body": "Vout = Vin × R2 / (R1 + R2) = 2.5 V"
      },
      {
        "title": "Worst-case tolerance corners",
        "body": "Minimum uses R₁ high and R₂ low: 2.475 V.\nMaximum uses R₁ low and R₂ high: 2.525 V."
      }
    ],
    "warnings": []
  },
  "assumptions": "Unloaded DC divider with positive resistances and a fixed, nonnegative input voltage. Tolerances are independent worst-case bounds, not a statistical confidence interval. Load impedance, input-voltage tolerance, temperature coefficients, and self-heating are excluded. Enter resistances in ohms.",
  "provenance": "Engineering Workbench calculation engine; unloaded DC divider model."
}